One-pot synthesis of various xanthene derivatives using ionic liquid 1, 3-disulfonic acid imidazolium hydrogen sulfate as an efficient and reusable catalyst under solvent-free conditions

In this study, 1,3-disulfonic acid imidazolium hydrogen sulfate （DSIMHS） is used as an efficient and reusable ionic liquid for the green, mild, and efficient synthesis of xanthenes under solvent-free conditions. Simple and easy work-up, low cost, green process, short reaction times and excellent yields of the products are the advantages of this procedure. Further, the catalyst can be recycled and reused at least for four times without a noticeably decrease in its catalytic activity.     

Adsorption separation performance of H2/CH4 on ETS-4 by concentration pulse chromatography

To exploit an effective adsorbent to separate hydrogen and methane, microporous titanium silicate molecular sieve NaETS-4 was synthesized and modified by strontium. The adsorption characteristics and diffusion behaviors of the prepared titanosilicate molecular sieve were studied by concentration pulse chromatography. And the effects of ion-exchange and dehydration temperature on adsorbent structure and gas diffusion were also discussed. The results showed that the thermal stability and Henry＇s Law constants were enhanced and micropore diffusivity decreased after exchanging Na＋ with Sr2＋. With the increase of dehydration temperature, Henry＇s Law constant and micropore diffusivity of CI-I4 decreased in both NaETS-4 and SrETS-4. While for 1-12 in SrETS-4, the increase of Henry＇s Law constant and the decrease of diffusion rate can be attributed to the shrinks of pore diameter resulting from the relocation of Sr2＋. Correspondingly, the kinetic selectivity of H2/CH4 reached 8.91 indicating its potentiality in separating H2 and CH4.     

(英)硫酸氢钾高效催化一锅法合成5-未取代的3,4-二氢嘧啶-2(1H)-酮

无溶剂条件下,硫酸氢钾可有效催化芳香醛、苯乙酮衍生物和脲的三组分"一锅法"Biginelli反应来合成5-未取代的3,4-二氢嘧啶-2(1H)-酮。确定了优化反应条件。产品结构经IR、1H NMR、MS和元素分析进行表征。     

热抽取法测定钴块中氢含量

研究了钴块中氢含量的测定方法。采用石英坩埚加载样品,热抽取法进行测定。不加任何助熔剂,分析功率为100%,匹配的分析时间为110 s,比较水平设定为0.1%。在选定的参数下,样品能在完全熔融状态下释放出全部氢。方法加标回收率为80%~119%,测定结果的相对标准偏差小于15%(n=6),检出限为0.5μg/g。热抽取法的精密度优于熔融法的精密度,满足微量气体分析的要求。     

惰气熔融-热导法测定钕铁硼永磁材料中的氢

建立惰气熔融-热导法测定钕铁硼永磁材料中氢的分析方法。当氧-氢比例大于50:1时,CO对氢的测定结果产生一定的干扰,加入舒茨试剂可消除此干扰。采用标准坩埚,称样0.05g,熔融功率为2.85 kW,选择高纯镍篮和锡片做助熔剂,钕铁硼中氢释放完全。以普通钢铁参考物质建立氢校准曲线,线性相关系数r～2=0.9999,检出限为0.75μg/g。该法用于钕铁硼样品中氢的测定,测定结果与脉冲熔融飞行时间质谱-气体元素分析仪测定结果基本一致,测定结果的相对标准偏差为1.4%(n=5)。该方法可以准确测定钕铁硼永磁材料中的氢,能满足日常分析的要求。     

Water-Soluble Polymers with Appending Porphyrins as Bioinspired Catalysts for the Hydrogen Evolution Reaction

Molecular design to improve catalyst performance is significant but challenging. In enzymes, residue groups that are close to reaction centers play critical roles in regulating activities. Using this bioinspired strategy, three water-soluble polymers were designed with appending Co porphyrins and different side-chain groups to mimic enzyme reaction centers and activity-controlling residue groups, respectively. With these polymers, high hydrogen evolution efficiency was achieved in neutral aqueous media for electro- (turnover frequency >2.3×10⁴ s⁻¹) and photocatalysis (turnover number >2.7×10⁴). Porphyrin units are surrounded and protected by polymer chains, and more importantly, the activity can be tuned with different side-chain groups. Therefore, instead of revising molecular structures that is difficult from both design and synthesis points of view, polymers can be used to improve molecular solubility and stability and simultaneously regulate activity by using side-chain groups.     

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co₄N) in working Li-S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single-crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co₄N enables stable operation of high-rate (10 C, 16.7 mA cm⁻²) and electrolyte-starved (4.7 μL mg_S⁻¹) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.     

Regulating Charge Transfer of Lattice Oxygen in Single-Atom-Doped Titania for Hydrogen Evolution

Single-atom catalysts have attracted much attention. Reported herein is that regulating charge transfer of lattice oxygen atoms in serial single-atom-doped titania enables tunable hydrogen evolution reaction (HER) activity. First-principles calculations disclose that the activity of lattice oxygen for the HER can be regularly promoted by substituting its nearest metal atom, and doping-induced charge transfer plays an essential role. Besides, the realm of the charge transfer of the active site can be enlarged to the second nearest atom by creating oxygen vacancies, resulting in further optimization for the HER. Various single-atom-doped titania nanosheets were fabricated to validate the proposed model. Taking advantage of the localized charge transfer to the lattice atom is demonstrated to be feasible for realizing precise regulation of the electronic structures and thus catalytic activity of the nanosheets.     

Sulfur-Modified Oxygen Vacancies in Iron–Cobalt Oxide Nanosheets: Enabling Extremely High Activity of the Oxygen Evolution Reaction to Achieve the Industrial Water Splitting Benchmark

The oxygen vacancies of defective iron–cobalt oxide (FeCoO_x-Vo) nanosheets are modified by the homogeneously distributed sulfur (S) atoms. S atoms can not only effectively stabilize oxygen vacancies (Vo), but also form the Co−S coordination with Co active site in the Vo, which can modulate the electronic structure of the active site, enabling FeCoO_x-Vo-S to exhibit much superior OER activity. FeCoO_x-Vo-S exhibits a mass activity of 2440.0 A g⁻¹ at 1.5 V vs. RHE in 1.0 m KOH, 25.4 times higher than that of RuO₂. The Tafel slope is as low as 21.0 mV dec⁻¹, indicative of its excellent charge transfer rate. When FeCoO_x-Vo-S (anode catalyst) is paired with the defective CoP₃/Ni₂P (cathode catalyst) for overall water splitting, current densities of as high as 249.0 mA cm⁻² and 406.0 mA cm⁻² at a cell voltage of 2.0 V and 2.3 V, respectively, can be achieved.     

Atomic Imaging of Subsurface Interstitial Hydrogen and Insights into Surface Reactivity of Palladium Hydrides

Resolving interstitial hydrogen atoms at the surfaces and interfaces is crucial for understanding the mechanical and physicochemical properties of metal hydrides. Although palladium (Pd) hydrides hold important applications in hydrogen storage and electrocatalysis, the atomic position of interstitial hydrogen at Pd hydride near surfaces still remains undetermined. We report the first direct imaging of subsurface hydrogen atoms absorbed in Pd nanoparticles by using differentiated and integrated differential phase contrast within an aberration-corrected scanning transmission electron microscope. In contrast to the well-established octahedral interstitial sites for hydrogen in the bulk, subsurface hydrogen atoms are directly identified to occupy the tetrahedral interstices. DFT calculations show that the amount and the occupation type of subsurface hydrogen atoms play an indispensable role in fine-tuning the electronic structure and associated chemical reactivity of the Pd surface.